Pulturated Sections Ladders, Handrails & Platforms
GRP Pulturated Ladders with Safety Cages, Hand rails, Platforms profiles are produced by the Pulturation process production. In general, all profiles are reinforced by fibreglass woven roving mats and direct roving fibre. Continuous fiberglass roving in the center absorbs longitudinal forces and loads. Their structure can bear high stress.
Goodwin Profiles is chosen for its mechanical strength, lightness, ease of installation and excellent resistance to fire and corrosion. These profiles allow on-site installation and modification without the need for special tools, no burring, and any painting or earth bonding finishing. Developed to withstand extreme weather conditions, salt water and most chemicals. Excellent fire behavior and self-extinguishing, does not conduct heat and has zero halogen in the case of fire. Resistant to corrosion and contributes to low maintenance costs.
Materials Of Constructions
GOODWIN Pulturation Profiles are made of Polyester Resin (Isopathalic Resin or Vinyl ester Resin) system with flame retardant and ultraviolet (UV) inhibitor additives. Standard colors are pigmented yellow. An industrial grade polyurethane coating is applied to stringers and rungs especially for outdoor applications. All cut or machined edges are sealed with a compatible resin.
Inner & Outer Layer
C-glass fiber is used so it has excellent non-corrosion property against chemical liquids.
Structural Layer
E-glass / ECR-glass fibre is used and it is supporting woven roving fabric type and direct roving for stability, mechanical and physical stiffness.
External Layer
It protects from aging and deformation originated from environmental factor such as ultraviolet rays.